Posts Tagged ‘reverse osmosis filter’

Industrial Brackish Water Reverse Osmosis Unit in Dubai UAE

Industrial Brackish Water Reverse Osmosis Unit in Dubai UAE


The Industrial Brackish Water Reverse Osmosis Unit was manufactured and supplied by Pure Aqua in January 2008 for a major water treatment company in Dubai. The BWRO Unit is capacity of 90,000GPD product water.


Feed water to the system is processed water with raw water TDS of about 2450 PPM. The system design was based on high rejection TFC spiral wound low fouling membranes.

The Reverse Osmosis Unit was selected from our RO-400 Series, model number BW-108K-3580. It produces 63 gpm of drinking water with TDS less than 50mg/L.

The BWRO Unit consists of 8″x40″ Hydranautics ESPA2 membrane elements, Codeline 8″ diameter FRP side ported pressure vessels, controlled by microprocessor with digital TDS read out, hi/low tank level switches, hi/low pressure switches, SS multistage pump and inlet shut off valve..


From a feed TDS of about 2,450mg/L at temperature range of 25 °C, the system produces 90,000gpd of high quality water at less than 50ppm. Since the time of its start-up in January 2008, the plant has been running smoothly with minimal troubleshooting.

for more about Industrial Brackish Water Reverse Osmosis


Reverse Osmosis Water Maker Works

A reverse osmosis water makers purifies water based on technology invented in the 1950’s. This water filter type is used in many industrial applications. You can now use this same type filter to get pure water in your home. Here’s what reverse osmosis can do and how it does it.

These filters can remove the very smallest of substances that pollute your water.

For example, the smallest bacteria particles sometimes can cause severe illness. This will give you an idea of the size of these dangerous bacteria. The thickness of a human hair is 300 times bigger than the width of these bacteria. A reverse osmosis filter gets these particles plus even smaller particles including chemical pollution and toxic metals too.

Here’s how it works. The key part is the membrane of the filter. Your water pressure forces water through a spiral shaped filter element. The pollution is stopped by the filter but part of the pure water passes through. The pollution is just stopped and dumped out with the waste water. Little or no pollution actually makes it into the filter element.

Filters last a long time since the pollution doesn’t really make it into the filter. That way there’s little maintenance and little changing of filters. It’s a cheap way to get pure water.

A reverse osmosis filter is a high tech solution to getting the purest water. It gets out even the smallest of pollution particles and it does it at low cost. There are several tricks though to getting the right filter for your home.

Source: Ezinearticles